Navigation: WRENCH SmartProject 202341 > Snags, Issues and Non-Conformance Lists >

Managing Non-Conformances List

 

 

 

 

 

Non-Conformances are issued when work in construction project fail to meet the required quality or there is a deviation in specification. Non-Conformances in SmartProject can be categorised to Non-Conformance – Quality and Non-Conformance – Safety.

Non-Conformances facility can be opened from the Modules option On the Global menu.

 

Figure: Opening from Global Menu

and from the Project.

 

Figure: Opening from Project

If Non-Conformances - Quality facility is opened from the Project, Non-Conformances-Quality List of the Project is displayed directly. In case Non-Conformances-Quality facility is opened from the Module options, the following window is displayed.

 

1.Click the browse button to select a Project. List of Projects will be displayed.

2.Select a Project from the list.

Non-Conformances-Quality List window is displayed. In case already Non-Conformances-Quality are created for the Project, details of the Non-Conformances-Quality are displayed in the window.

Figure: Non-Conformance List window

Count of Total number of Non-Conformances and count of Non-Conformances with different statuses like Created, Open, Closed, Work In Progress, Completed and Canceled will be displayed in different tabs. On clicking a tab, the respective Non-Conformances List will be displayed. For Example: If the tab OPEN is clicked, list of Non-Conformances with status Open will be displayed.

Creating a Non-Conformance

A  Non-Conformance can be created only by a user with security permission to create a Non-Conformance.

To create a Non-Conformance

1.On the window click Create. Create Non-Conformance window is displayed.

Figure: Create Non-Conformance window

Create Non-Conformance window is divided in Basic Details pane, Advance Details pane and Documents pane. Basic Details pane is expanded by default.

2.Enter values for different properties displayed in the window. Properties with an Asterix mark is mandatory.

Properties and their description are provided in the following table.

#

Property

Description

1

NON-CONFORMANCE NUMBER

NON-CONFORMANCE NUMBER is generated automatically.

2

DESCRIPTION

Enter a description for the Non-Conformance.

3

DEFECT CATEGORY

Click the browse button to select a defect category. Defect Category window is displayed. Select a category from the list.

4

DISCIPLINE

Click the browse button to select a Discipline. Disciplines window is displayed with a list of pre-defined disciplines. Select a discipline from the list.

5

SPECIALISATION

Click the drop-down to select a specialisation. List of specialisations defined in masters is displayed. Select the required specialisation from the list.

6

VENDOR

Click the browse button next to the field vendor. Search Vendors window is displayed. Select a Vendor from the list and click OK.

7

TO BE RECITIFIED BY

Click the browse button to select the name of person who is assigned to Inspect/Rectify the Non-Conformance. Search User window is displayed. Select a User from the list of users.

8

AGENCY

The origin of the selected To Be Rectified By user is displayed automatically.

9

AREA CODE

Click the browse button to select an Area Code. On clicking the browse button Area window with the list of Areas is displayed. Select an Area from the list.

10

AREA DESCRIPTION

Description of the selected area is displayed here.

11

LOCATION

Enter details about the location where the  Non-Conformance is found.

12

PENALTY

If an issue is not solved as per the norms, there will be a penalty for this. User can enter the penalty value here.

13

PRIORITY

Select a Priority from a drop-down list. Options available are Low, Medium and High.

14

COMPLIANCE DURATION


 

Enter the time took to rectify the defect. Here a facility to specify the numeric value and a unit is available. Unit can be selected from a drop-down list

15

TARGET DATE

Select the date (with time) by which the defect is to be closed (rectified or accepted). This can be selected from a date picker. The selected date should not be higher than the Created Date.

16

ACTUAL FINISH DATE

This field is disabled when creating a Non-Conformance. Date is captured automatically when the status is changed to ‘Closed’. The date can be changed in edit mode while closing the defect. Actual Finish Date can be edited while carrying out Update Status operation, when new status is changed to closed.

17

AUTHORISE TO CLOSE

Select the users who are authorized to close the Non-Conformance. Current user name appears here by default. Click the browse button to select a different user. Multiple users can be selected.

18

ROOT CAUSE OF INCIDENT

Enter root cause of the defect.

19

CREATED DATE

The date (with time) on which the Non-Conformance is created is displayed here. Current date with time is displayed by default. The date can be changed by the user.

20

APPROVER

Select a user who is authorized to approve the Non-Conformance for further action. The current user name appears here by default. User may change by clicking the browse button and selecting a different user from User Search window. Only a single user can be selected as an approver.

21`

NOTES

Enter any additional information as specified by user.

After entering basic details, enter values for properties under Advanced Details. Properties under Advanced Details are mentioned in the following table.

#

Property

Description

1

PEOPLE TO BE NOTIFIED

Select the users to whom notifications are to be sent when the Non-Conformance is created or closed.

3

SEVERITY

Select the severity level from a drop-down list. Values available are LOW, MEDIUM, HIGH. By default, LOW is displayed.

After entering Advanced Details, attach files  and images to the Non-Conformance. Details are mentioned in the following table.

#

Property

Description

1

IMAGES

Click here to add images that support the reported Non-Conformance. Duplicate images can be added.

2

FILES

Click here to add any supporting files as assigned to the reported  Non-Conformance.

After attaching files and images, you can Reference and Related Files.

1

DOCUMENTS

Click Add Documents to add latest revision of any documents in WRENCH that can act as reference to the non-conformance. On clicking this option Search window is displayed. Enter a search criteria and search for the required document.

2

PACKAGES

A package can be attached to a non-conformance.

To attach a package

1.Click the browse button to attach a package.

WBS Levels selection window is displayed.

2.Select a level from the displayed levels.

Selected level is displayed in the field PACKAGES.

3

TASKS

Task can be attached to a Non-Conformance.

To attach a task

1.Click Add Tasks.

Advanced Search window is displayed.

2.Here carry out a task operation and select a task from the search results.

You can select single or multiple snags and close them

After entering the details click Save to store changes. Non-Conformance create successfully message is displayed. Created Non-Conformance List is displayed in the grid.

Fetching details from Non-Conformance group

If Non-Conformance groups are available against the project, it is possible to fetch the details associated with the group, only if the corresponding data field in window is empty. This helps to specifying details quickly.

To fetch details from Non-Conformance group

1.On the Create Non-Conformance window click Get Details from Groups.

Non-Conformance Groups window is displayed. Group Names are displayed in the window.

2.Select a Group Name and click OK. Details assigned to the group will be inherited to the Non-Conformance.

Notifying Non-Conformance creation

When a Non-Conformance is created a single notification mail can be send to the concerned users.

To send notifications

1.Select the created Non-Conformance On the tool bar click Notify.

Notification Request Posted Successfully message is displayed. On the grid, a green tick mark is displayed in the column NOTIFICATION STATUS.

Modifying Non-Conformance Details

Non-Conformance details of a Non-Conformance in CREATED status can be modified.

To modify a Non-Conformance

1.Click the Non-Conformance number which is a hyperlink. Update Non-Conformance window is displayed.

Figure: Update Non-Conformance window

Only fields edit mode can be updated.

2.After updating the fields click Save to store changes.

Viewing status  history

A facility to view the status history  is available.

To view status history

1.On the Non-Conformances details window, click the tab Status History.

On clicking the tab, Status History of the opened Non-Conformance is displayed.

Viewing log of Operations

A facility to view the status history  is available.

To view operations log

1.On the Non-Conformances details window, click the tab Operations Log.

On clicking the tab, log of operations carried out on the selected non-conformance is displayed.

Closing a Non-Conformance

A user who is authorised to close a Non-Conformance only can carry out this operation.

To close the Non-Conformance

1.Select the Non-Conformance and On the tool bar click Close.

 Close Non Conformances  window is displayed.

Figure: Close Non Conformances  window

The following information is displayed in the window.

NCR Number: NCR Number of the selected NCR's are displayed here.

Description: Description of the selected NCR's are displayed here.

Remarks: Enter remarks here.

Fixed image: Here images can be added before closing. Multiple images can be added.

Actual Finish Date: Select a closure date from the date picker.

2.Click OK to close the selected NCR's.

If there are multiple users assigned to close the NCR, system will capture the actual finish date specified by the last user.

On case multiple users are authorised to close the Non-Conformance, status of the Non-Conformance will change to close only after all the authorised users have closed the Non-Conformance. On the Update Non-Conformance window, user who have closed the Non-Conformance is highlighted in green colour as displayed in the following figure.

Figure: Displaying user information

The Non-Conformance status will be set to closed only when all the users in the field ‘Authorise Closure’ have updated the status to ‘Close’. If an already closed user is removed and then added, user status will be not closed.

Updating Non-Conformance status

During the lifecycle of a Non-Conformance, if some mistakes happen, user may need to reverse the status. For Example: When a Non-Conformance item is wrongly approved, wrongly updated with a rectification status etc.

To update Non-Conformance status

1.Select the Non-Conformance for which status is to be updated, and in the toolbar click Update Status.

Update Status window is displayed.

Figure: Update Status window

The following fields are displayed in the window.

DESCRIPTION: Description of the Non-Conformance is displayed here.

CURRENT STATUS: Current Status of the Non-Conformance is displayed here.

NEW STATUS: This can be selected from a drop-down list. Options available are Cancelled, Closed and Completed if the current status is open. The items in the drop-down list changes based on the current status of the snag.

REMARKS: Enter Remarks or notes.

If the New Status selected is Completed or Closed, additional fields will be displayed in the Update Status window.

Figure: Update Status window-Additional fields

2.Click Add Image to add an image from the disk.

3.Select a Rectification Status from a drop-down list.

4.Enter remarks if any.

5.Click Save.

Status Updated Successfully window is displayed.

Approving a Non-Conformance

Only the ‘Approver’ assigned to a Non-Conformance may approve it. When other users attempt to approve the Non-Conformance a warning message is displayed, and the operation is aborted.

To approve a Non-Conformance

1.Select the Non-Conformance that are to be approved from the grid.

2.On the tool bar click Approve.

Approved Successfully message is displayed.

Removing a Non-Conformance

A Non-Conformance can be removed by authorised users. Creator of the Non-Conformance can remove the Non-Conformance before it is approved. Approver and Authorised to Close user can remove the Non-Conformance any time.

To remove a Non-Conformance

1.On the grid select the Non-Conformance that is to be removed.

2.On the tool bar click Remove.

A message Do you want to remove the selected items is displayed.

3.Click YES to remove the Non-Conformance.

Non-Conformance is removed successfully. Once removed, immediate notifications will be sent to the following resources (excluding the current user):

Approver (if not approved)

To be rectified By (if approved and not closed)

Authorised to close (If approved and not closed)

Operation Log

Operation log captures the following Non-Conformance operations.

1.Creation

2.Editing

3.Removal

4.Approval/ cancellation

5.Completion

6.Closure

7.Updating Status

To view the operation log

1.Select the  Non-Conformance and in the toolbar click Operation Log.

Operation Log window.

Figure: Operation Log window

Here the following details will be displayed.

1.Operation Name

2.Log Time

3.User Name

4.Operation Description

2.Click Close to close the window.

Non-Conformance configuration and security settings

Several configurations are required to avail the Non-Conformance handling functionality. The administrators can use the ‘Administrative Settings option available in the Non-Conformance main window to manage the configurations.

Creating Defect Categories

When reporting Non-Conformance, it is a common practice to categorise them based on the nature of defects. This helps in assigning the experts in rectifying the respective type of defects. Also, common practices for rectification can be defined, making the rectifications quicker.

To create defect categories

1.On the  Non-Conformance main window click the Administrative Settings window.

Non-Conformance Management Administration window is displayed.

Figure: Administration window

Defect Categories tab is selected by default. Category codes created are displayed in the grid.

2.On the toolbar click Add. A pop-menu is displayed.

Figure: Create Category-Menu

Option Main Category can be used to create a new defect category at the first level of the hierarchy and the option Sub Category can be used to create a sub category under a selected category. If no categories are currently selected, this option will be disabled.

1.Click Main Category.

Defect Category window is displayed.

Figure: Defect Category window

2.Enter a Category Code and Description.

3.Click OK to save entered values.

To create a sub category

1.Select a category and On the tool bar click Add. A menu is displayed.

2.On the menu click Sub Category. Defect Category window is displayed.

Figure: Defect Category

Value of main category is displayed in the window.

3.Enter a Category Code and Description.

4.Click OK to save the entered values.

Modifying defect categories

Defect categories created can be modified.

To modify a defect category

1.Select the defect category that is to be modified.

2.On the toolbar click Edit.

Defect Category window is displayed. Here it is possible to edit the entered values.

3.After editing the values click Save.

Removing defect categories

Defect Categories can be deleted. Only defect categories that are not in use can be removed.

To remove defect categories

1.Select single or multiple defect categories and in the toolbar click Remove.

A message Are you sure to remove the selected categories and its child levels is displayed.

2.Click YES to remove the category. Click NO to abort the operation.

Creating Non-Conformance groups

Groups helps to define a list of common types of Non-Conformance for which default set of characteristics values can be predefined. This will help to create Non-Conformance easily instead of specifying values for each Non-Conformance properties individually.  A group can be assigned to a Non-Conformance and the property values as defined for the group will be inherited by the Non-Conformance.

To create  Non-Conformance groups

1.On the Non-Conformance main window click Project Settings.

Non-Conformance Management Settings for the respective project is displayed.

Figure: Non Conformance management setting window

The window has four tabs, Groups, Security, Reminder & Escalations and Settings. By default, tab Groups is selected.

To create a group

1.On the toolbar click Add.

Non-Conformance Group Details window is displayed.

2.On the window enter values for the fields mentioned in the following table.

#

Property

Description

1

Group Name

Enter a name for the group.

2

Area Code

Click the browse button to select an Area Code. Area window is displayed where available areas are listed. Select an area from the list.

3

Area Description

Value is filled in automatically when an area is selected.

4

Discipline

Click the browse button to select a Discipline. Disciplines window is displayed where available disciplines are listed. Select the discipline from the list.

5

Approver

Click the browse button to select an approver from the Search User window.

6

To be rectified by

Click the browse button to select the name of the user who is expected to rectify/ resolve Non-Conformance in this group. Users can be selected from the Search User window.

7

Notify the following users

When the Non-Conformance is created or updated as not resolvable or closed, notifications can be sent to a group of people. Click the browse button to select multiple users from Search User window.

8

Authorise Closure

When the Non-Conformance is marked for closure, it gets closed only when authorized personnel accepts it. User may specify multiple users here separated by comma, any one of whom may close snags in this group.

3.After entering the values click OK.

Group is saved successfully and is displayed in the grid.

Figure: Displaying created group

It is possible to edit group details and remove a group.

Security Settings

Security defined here is applicable to both Users and  User Groups (Roles). Only users with security right can manage a snag.

To define security

1.On the Non-Conformance window click the Administrative Setting icon.

Non-Conformance Quality Management Settings window for the respective project is displayed.

2.Click the tab Security. List of users in the project is displayed.

3.Select the checkbox in the column Manage corresponding to a user.

4.Click Save to store the changes. Saved Successfully message is displayed.

Manage permission is assigned to the set of users.

NOTE: Non-Conformance Safety is also managed similar to Non-Conformance Quality. There is no significant difference in the way they are handled.

Configuring Escalations and Notifications

Reminders and escalations can be configured for Non-Conformances.

To configure reminders and escalations

1.On the Non-Conformance Settings window click Reminders & Escalations.

Reminders and Escalations settings window is displayed. On the window separate panes are available for configuring Reminders and Escalations.

Figure: Reminders and Escalations configuration window

To configure a reminder

1.On the Reminders pane tool bar click Add.

NCQ - Reminder Details window is displayed.

Figure: NCQ - Reminder Details window

2.On the window enter values for the following properties.

Description: Enter a description for the reminder.

Days prior to due date: Enter the number of days before the due date, when the reminder should be sent.

Mail Template: Select a mail template from the drop-down list.

3.Click Save to store the settings. The created reminder setting is displayed in the window.

To configure an escalation

1.On the Escalations pane tool bar click Add.

NCQ - Escalation Details window is displayed.

Figure: NCQ- Escalation Details window

2.On the window enter values for the properties mentioned in the following table.

#

Property

Description

1

Description

Enter a description for the escalation.

2

Day after due date

Enter the number of days after the due date, on which an escalation is to be sent.

3

Priority

Select a priority for the escalation from a drop-down list.

4

To and Cc

Enter the recipients for the escalation.

5

Mail Template

Select a mail template from a drop-down list.

6

Notify

Select the checkbox next to the resource that is to be notified.

3.Click Save to store the changes.

Escalations and reminders are sent based on the configuration made here.

Managing Settings

User who creates the non-conformance is automatically assigned as the approver. But in some project sites, non-conformance created by a resource must be approved by another resource. Since both scenarios are required on site, a setting Assign creator as approver by default is available in the Settings tab of Non-Conformance Management Settings window.  If the checkbox next to this option is selected, creator is assigned as the approver by default. If the checkbox next to this option is not selected, user needs to select an approver.

Figure: Non-Conformance Settings

There are scenarios where a PMC user may raise a Snag, issue and NCR and assign it to the contractor user. The contractor user assigned to the Snag, Issue or NCR may need to reassign the Snag, Issue or NCR to the actual user in their team who will work on the objects to close it. Currently, this is not allowed. The assigned resource cannot reassign.Also, when the PMC has assigned one contractor user to a Snag, Issue and NCR, it cannot be changed. Hence if a wrong user is assigned, it cannot be rectified. This also needs modification.

As a solution to this, a setting to allow the user in “To be rectified by” field to assign work to another resource is available.

If the checkbox next to the setting Allow "To be Rectified by" user to reassign is selected, resources assigned as To be Rectified by users will be able to reassign the issue.

 


 

 

 

 

Copyright © 2024 WRENCH Solutions